Our Odour, Particles and VOC treatment2
ModuPlasma®
Direct oxidation treatment with cold plasma technology collecting particles and droplets containing odour
- Volume: 20 000 m3/h per module
- Power: 10 – 25 kW (max. 30 kW)
- Relative humidity: < 100%
- Temperature: < 70 °C
- Weigh: approx. 2 000 kg per module with platforms
- One module is 5,5 m tall and footprint is 3,0 m by 1,7 m
ModuPlasma® HD
High Density Plasma Reactor is our take on moving the cold plasma technology further
The ModuPlasma® HD solution has been developed over the past few years, and is the “next generation” ModuPlasma® , however with a much smaller size and without the collection capabilities.
The ModuPlasma® HD solution has its own power supply technology, built on the experience from ModuPower®.
Power consumption 18 kW/60 000 m3/h treated air.
Odour Solutions - UV
Ultraviolet light UV, Scrubbers, Activated Carbon Filtration, Scrubber Alkaline, Particle and dust abatement solutions
ModuPlasma® alone will typically reduce odour by up to 90%. With high aerosol content, the ModuPlasma® will be used as an ESP – with a highly efficient collection – as odour is present in the aerosols.
Additional odour treatment can be used if required.
A possible solution can be combining ModuPlasma® with UV, scrubber and activated carbon
Typical industry examples
Fish feed
Pet Food
Food
Pharmaceutic
Vegetable oil
Tobacco
Paint & Coating
Plastic
Chemical
Rendering
NOx
SOx
Cement
Rubber
Semiconductor
Coal
Steel
Others
Our ESP Power Supplies
ModuPower® MPX
Optimize your existing or new ESP system with ModuPower® to improve Particulate Matter collection efficiency.
Modularity: each module is 30 kW
Advanced cooling
Simplified maintenance
Remote mounting with cable
Fixed switching frequency 35 kHz
Large range of output ratings
Voltage: fixed per power supply
Current: variable and changeable
SeidPower®
Introduction to the new power platform. Doubling the output power per module and reducing cost and size.
Modularity: each module is 60 kW
Reduced in size
Reduced in cost
Improved efficiency
Improved rating flexibility
Improved ruggedness
Building block for ModuPlasma® HD
SeidPower® Marine
The SeidPower® Marine is designed for energizing wet ESPs in marine- and similar applications.
Vibration resistance
Certified DNV
Modularity: each module is 60 kW
Advanced cooling
Simplified maintenance
Remote mounting with cable
Fixed switching frequency 35 kHz
Large range of output ratings
Voltage: fixed per power supply
Current: variable and changeable
Our Concept "One stop shop"
- Inspection
- Repair
- Supervision
- Online support
- Remote troubleshooting
- Calibration
- Testing
- Production
- Software update
- Spareparts
- ModuPlasma® Technology
- ModuPower® Technology
- Dry coolers
- Heat exchangers
- Heat Recovery systems
- Access & service platforms
- Ducting / Manifolds
- Fans
- Air Valves / Dampers
- Chimneys / Stacks
- Scrubbers
- AC filters
- UV systems
- Mechanical design
- Thermodynamical analysis
- CFD simulations
- 3D scanning
- Support
- Training
- Documentation
- Project management
- Odour and chemical measurements and analysis
- Pay-off evaluations
- System analysis
- Mapping
- Sampling
- Administration
- Freight Sourcing
- Vast experience in international logistical procedures
- Storing
- Voltage regulation
- Current limiting
- Ripple and noise filtering
- Spark protection
- Regulatory observance
- Remote operation
- Air flow measurement and adjustments
Our Energy Recovery System
Reduction in energy use and therefore Operational Costs (OPEX)
Heat Exchangers
Energy source:
Process exhaust gas
Direct savings:
Low system pressure drop
High efficient fans
Use of recovered energy:
To the process(on the intake side) = preheating of the process air
Directing to other needs = heating of ventilation air and building heating
Combination of above
Mist/droplet eliminators
Increased odour reduction
Reduced maintenance of reactors and heat exchangers
Air to liquid to air (coils)
Great flexibility
The distance between coils can be significant
Efficient for lower temperatures (≤ 90°C)
Different material choices, also for corrosive applications
Air to Air Plate
Heat is transferred between two air streams through the channel walls of the heat recovery unit
Simplicity (no moving parts, no pipelines)
Different material choices are available, also for corrosive gasses
Other products
Scrubbers
Energy source:
Process exhaust gas
Direct savings:
Low system pressure drop
High efficient fans
Use of recovered energy:
To the process(on the intake side) = preheating of the process air
Directing to other needs = heating of ventilation air and building heating
Combination of above
Ducting and manifolds
Increased odour reduction
Reduced maintenance of reactors and heat exchangers
Fans
Great flexibility
The distance between coils can be significant
Efficient for lower temperatures (≤ 90°C)
Different material choices, also for corrosive applications
Chimneys and stacks
Heat is transferred between two air streams through the channel walls of the heat recovery unit
Simplicity (no moving parts, no pipelines)
Different material choices are available, also for corrosive gasses
Accesss and service platforms
Heat is transferred between two air streams through the channel walls of the heat recovery unit
Simplicity (no moving parts, no pipelines)
Different material choices are available, also for corrosive gasses
Air Flow from Factory
Air Flow from Factory
Air Flow from Factory
Colling Control Cabinet
SeidPower® Power Supply
ModuPlasma® HD Odour and VOC Treatment
Exhaust to Atmosphere
Exhaust to Atmosphere
ModuPlasma® Odour and VOC Treatment
Problems with Industrial Odour and VOC?
We deliver standard and customized solutions since 1997
Our Technology
- High Frequency Power Supply: SEID converts low-voltage grid power into pulsed ultra high-voltage power.
- Non-thermal Plasma Reactors: The pulsed power is used to create a plasma “forcefield” to split molecules with minimal energy consumption
By combining the two technologies, SEID can offer something no-one else can,
with multiple applications
Our Partners and Distributors
