We deliver standard + customized solutions, to fit the client’s needs because there is no single solution to odour problems.
In many cases, we often customize with additional technologies for optimal performance.
+ ModuPlasma® or ModuPlasma® HDP (High-Density)
+ Ultraviolet light (UV)
+ Scrubbers
+ Activated Carbon filtration
+ Particle & Dust abatement solutions
Odour problems can have several causes. In order to find the correct solution for specific customer problems, our specialists will be with our customers every step of the project process.
Survey your odor problem by questioning the following:
The ModuPlasma® Mobile Test Center is a modular-based, fully functional abatement system designed for 1. 600 m³/h, where our commercial systems start at 25.000m3/h and upwards.
The ModuPlasma® Mobile Test Center is equipped with a non-thermal plasma unit, UV system, and activated carbon filter, which can be configured in different configurations depending on the emission to be treated.
We reuse as much as possible of the existing equipment. Our solutions have a low environmental impact. We reduce waste by-products and keep water consumption and possible chemicals to a minimum.
Our solutions require low energy consumption. This is not only environmentally friendly but also reduces operational costs.
ModuPlasma® offers a variety of different solutions that can be adapted to our customers’ needs and contribute to environmental protection.
We focus on our customers’ operational costs and ROI is always a key factor!
Pet food, animal and fish feed often have a high dust content, requiring a cyclone or bag filter before odour treatment.
For wet emissions, ModuPlasma® can also be used as a wet ESP – highly efficient particle collection – odour treatment in a second step.
Depending on the inlet concentration, odour abatement down to 2.500 OUE usually is achievable with ModuPlasma® alone.
Chemistry can contain amines, organic acids, aldehydes, organic sulphur compounds, and terpenes.
ModuPlasma® alone will typically reduce odour by 65% to 80%. With high aerosol content, the ModuPlasma® will be used as an ESP – with a highly efficient collection – as odour is present in the aerosols.
Additional odour treatment can be used if required.
A typical solution is the ModuPlasma® + UV + scrubber.
Chemistry can contain amines, aldehydes, ketones, organic acids, organic nitrogen and sulphur compounds.
Odour loads vary a lot which makes chemistry analysis/concentration via oxidation and activated carbon is typically found in pumping stations or ventilation.
A high incoming concentration via scrubber (acid or alkaline, depending on the chemistry), oxidation, and scrubber (alkaline) are typically found in wastewater treatment plants.
Chemistry can contain H2S, alcohols, aldehydes, ketones, organic acids, organic nitrogen, and sulphur compounds.
High odour loads are typical for rendering and can be millions of OUE. This requires several steps of treatment depending on the chemistry load.
A typical solution is the use of scrubber + oxidation + scrubber. ModuPlasma® can also be used to collect particles upstream.
Chemistry can contain amines, organic acids, aldehydes, organic sulphur compounds and terpenes.
You can also contact us through our partners and distributors:
