Our Odour, Particles and VOC treatment2

ModuPlasma®

Direct oxidation treatment with cold plasma technology  collecting particles and droplets containing odour

  • Volume: 20 000 m3/h per module
  • Power: 10 – 25 kW (max. 30 kW)
  • Relative humidity: < 100%
  • Temperature: < 70 °C
  • Weigh: approx. 2 000 kg per module with platforms
  • One module is 5,5 m tall and  footprint is 3,0 m by 1,7 m

ModuPlasma® HD

High Density Plasma Reactor is our take on moving the cold plasma technology further

The ModuPlasma® HD solution has been developed over the past few years, and is the “next generation” ModuPlasma® , however with a much smaller size and without the collection capabilities.

The ModuPlasma® HD solution has its own power supply technology, built on the experience from ModuPower®.

Power consumption 18 kW/60 000 m3/h treated air.

Odour Solutions - UV

Ultraviolet light UV, Scrubbers, Activated Carbon Filtration, Scrubber Alkaline, Particle and dust abatement solutions

ModuPlasma® alone will typically reduce odour by up to 90%. With high aerosol content, the ModuPlasma® will be used as an ESP – with a highly efficient collection – as odour is present in the aerosols.

Additional odour treatment can be used if required.

A possible solution can be combining ModuPlasma® with UV, scrubber and activated carbon

 

Typical industry examples

Fish feed

Pet Food

Food

Pharmaceutic

Vegetable oil

Tobacco

Paint & Coating

Plastic

Chemical

Rendering

NOx

SOx

Cement

Rubber

Semiconductor

Coal

Steel

Others

Our ESP Power Supplies

ModuPower® MPX

Optimize your existing or new ESP system with ModuPower® to improve Particulate Matter collection efficiency.

Modularity: each module is 30 kW

Advanced cooling

Simplified maintenance

Remote mounting with cable

Fixed switching frequency 35 kHz

Large range of output ratings

Voltage: fixed per power supply

Current: variable and changeable

 

SeidPower®

Introduction to the new power platform. Doubling the output power per module and reducing cost and size.

Modularity: each module is 60 kW

Reduced in size

Reduced in cost 

Improved efficiency

Improved rating flexibility

Improved ruggedness

Building block for ModuPlasma® HD

SeidPower® Marine

The SeidPower® Marine is designed for energizing wet ESPs in marine- and similar applications.

Vibration resistance

Certified DNV

Modularity: each module is 60 kW

Advanced cooling

Simplified maintenance

Remote mounting with cable

Fixed switching frequency 35 kHz

Large range of output ratings

Voltage: fixed per power supply

Current: variable and changeable

Our Concept "One stop shop"

Our Energy Recovery System

Reduction in energy use and therefore Operational Costs (OPEX)

Heat Exchangers

Energy source:

Process exhaust gas

Direct savings:

Low system pressure drop 

High efficient fans

Use of recovered energy:

To the process(on the intake side) = preheating of the process air

Directing to other needs = heating of ventilation air and building heating

Combination of above

Mist/droplet eliminators

Increased odour reduction

Reduced maintenance of reactors and heat exchangers

Air to liquid to air (coils)

Great flexibility

The distance between coils can be significant

Efficient for lower temperatures (≤ 90°C)

Different material choices, also for corrosive applications

Air to Air Plate

Heat is transferred between two air streams through the channel walls of the heat recovery unit

Simplicity (no moving parts, no pipelines)

Different material choices are available, also for corrosive gasses

Other products

Scrubbers

Energy source:

Process exhaust gas

Direct savings:

Low system pressure drop 

High efficient fans

Use of recovered energy:

To the process(on the intake side) = preheating of the process air

Directing to other needs = heating of ventilation air and building heating

Combination of above

Ducting and manifolds

Increased odour reduction

Reduced maintenance of reactors and heat exchangers

Fans

Great flexibility

The distance between coils can be significant

Efficient for lower temperatures (≤ 90°C)

Different material choices, also for corrosive applications

Chimneys and stacks

Heat is transferred between two air streams through the channel walls of the heat recovery unit

Simplicity (no moving parts, no pipelines)

Different material choices are available, also for corrosive gasses

Accesss and service platforms

Heat is transferred between two air streams through the channel walls of the heat recovery unit

Simplicity (no moving parts, no pipelines)

Different material choices are available, also for corrosive gasses

Air Flow from Factory

Air Flow from Factory

Air Flow from Factory

Colling Control Cabinet

SeidPower® Power Supply

ModuPlasma® HD Odour and VOC Treatment

Exhaust to Atmosphere

Exhaust to Atmosphere

ModuPlasma® Odour and VOC Treatment

Problems with Industrial Odour and VOC?

Pet food and fish feed / Vegetable oil processing / Sewage and waste water treatment / Rendering / Tobacco / Cement / Rubber / Coal / Steel / Others

We deliver standard and customized solutions since 1997

75-99% Odour removal efficiency / Very low maintenance and operation cost / Low energy and water consumption / Small footprint / Minimal usage of chemicals / Low CAPEX and OPEX

Our Technology

  1. High Frequency Power Supply: SEID converts low-voltage grid power into pulsed ultra high-voltage power. 
  2. Non-thermal Plasma Reactors: The pulsed power is used to create a plasma “forcefield” to split molecules with minimal energy consumption

By combining the two technologies, SEID can offer something no-one else can,
with multiple applications

Enter your e-mail and you will get the brochure in your mailbox: